DPF CLEANING SYSTEM

HOW THE DCS-18 WORKS

 

DCS18 High pressure air cleaning solution for Euro 6 truck DPF’s

 

The DCS18 will clean the cartridge filters from all Euro 6 truck DPF’s. Full stainless steel body.Firstly measure the diameter of the DPF, then using the control panel choose the correct diameter size. Open the door and place the filter in the centre of the machine. When this is completed close the door and press the Home button on the control panel. This will set the high pressure air probe in the default start position. At this point you can use manual controls or automatic. When selecting automatic the air probe will move to the edge of the DPF using the diameter value entered earlier. The air flow will then start and the probe will go back and forth covering every part of the DPF and forcing the soot ash and Carbon through the filter. The contaminated air then goes through a triple filtration system and is exhausted out as clean non harmful air into the working environment. The machine will stop automatically and the DPF can be removed. The filter is now clean and ready to go back on the vehicle.

           Product Specifications
Description Commercial DPF Cleaning System
Model No. DCS-18
Input Power 220V / 50HZ
Air Pressure 2-10 Bar
Cleaning Agent Detergent/ Air
Max. Air Flow 285mmA Q
Weight 200KG
Dimensions 1050(W) X 700(D) X 1500 (H)
dcs-18-branded-machine-768x1024

DPF Blockage – Regeneration

 

Every 300 miles the DPF will regenerate by super-heating the filter to born off diesel paticles that collect there as soot.

 

Most of the soot is then expelled throught the exhaust as finer particles of harmless ash. However it has been found that the regeneration process leaves residual behind in the filter.

 

Each time a regeneration occurs, more ash will build up in the filter, at around 33,000miles ash can acount for 50% of the material blocked completely and the engine may stop working.

 

The Carbon-Clean DPF Pro clean Treatment when used alongside the DCS-18 is a fast and cost effective way to completely clean and protect an DPF.

  • Automatic & Manual modes
  • Euro 6 DPF Cleaning max ratio 37
  • Triple Air filter with flexible exhaust
  • DOC/DPF/SCR Catalyst cleaning
  • Excellent business opportunity/Revenue generator

AIR PRESSURE

How It Works

HOW THE DCS-18 WORKS

 

DCS18 High pressure air cleaning solution for Euro 6 truck DPF’s

 

The DCS18 will clean the cartridge filters from all Euro 6 truck DPF’s. Full stainless steel body.Firstly measure the diameter of the DPF, then using the control panel choose the correct diameter size. Open the door and place the filter in the centre of the machine. When this is completed close the door and press the Home button on the control panel. This will set the high pressure air probe in the default start position. At this point you can use manual controls or automatic. When selecting automatic the air probe will move to the edge of the DPF using the diameter value entered earlier. The air flow will then start and the probe will go back and forth covering every part of the DPF and forcing the soot ash and Carbon through the filter. The contaminated air then goes through a triple filtration system and is exhausted out as clean non harmful air into the working environment. The machine will stop automatically and the DPF can be removed. The filter is now clean and ready to go back on the vehicle.

Specifications
           Product Specifications
Description Commercial DPF Cleaning System
Model No. DCS-18
Input Power 220V / 50HZ
Air Pressure 2-10 Bar
Cleaning Agent Detergent/ Air
Max. Air Flow 285mmA Q
Weight 200KG
Dimensions 1050(W) X 700(D) X 1500 (H)
dcs-18-branded-machine-768x1024
Technical Parameters

DPF Blockage – Regeneration

 

Every 300 miles the DPF will regenerate by super-heating the filter to born off diesel paticles that collect there as soot.

 

Most of the soot is then expelled throught the exhaust as finer particles of harmless ash. However it has been found that the regeneration process leaves residual behind in the filter.

 

Each time a regeneration occurs, more ash will build up in the filter, at around 33,000miles ash can acount for 50% of the material blocked completely and the engine may stop working.

 

The Carbon-Clean DPF Pro clean Treatment when used alongside the DCS-18 is a fast and cost effective way to completely clean and protect an DPF.

Features
  • Automatic & Manual modes
  • Euro 6 DPF Cleaning max ratio 37
  • Triple Air filter with flexible exhaust
  • DOC/DPF/SCR Catalyst cleaning
  • Excellent business opportunity/Revenue generator
Cleaning Products

AIR PRESSURE

Join the Revolution!

Carbon Clean machines are exclusive and are original concepts and designs. If you see them available elsewhere they are rip-offs please contact us.