You can operate the HPCS-16 machine through the control panel and a simple foot-switch. This machine has a big reservoir that allows parts to be soaked as required. The water and detergent mixture in this reservoir is heated to set temperatures between 40-60degrees and deployed through the powerful gun or the low-pressure fixed nozzle. The mixture is double filtered and recycled to clean all manner of parts in-house, keeping running costs for the operator as low as possible. After the process, no pollution, no harmful additives gases or chemical to harm you, and your car or the environment. The whole process is also very economical, potentially saving motorist much money.
  • Remove carbon deposits
  • Lower emissions.
  • Restore engine horsepower
  • Optimize combustion efficiency
  • Increase engine life
  • Improved Compression
  • A Longer Life Expectancy for Your Engine
  • Increased Engine Performance
  • Lowers Oil Consumption
The High-Pressure Cleaning System allows the operator to remove excess carbon build-up from all manner of car components like the inlet manifold or exhaust system. This stainless-steel body machine houses a 70-liter detergent reservoir with a powerful 3.7kw motor that delivers 40-100bar cleaning jet. It also features CE certified operator gloves, which are 80cm in length and constructed from hard wearing chemical-resistant Neoprene.

The Washing table houses the 70L detergent reservoir just below it with easy access from above. This allows use of the reservoir to soak parts as and when required. The water and detergent mixture can be heated to set temperatures of 40-60 C and deployed through either the low pressure fixed nozzle or the high pressure gun. The mixture is double filtered and recycled through the system keeping running costs as low as possible. When the mixture comes to the end of its useful life it is easily drained thought the waste value in the base of the cabinet.  With the whole cleaning area being self contained any spray is kept within the protection of the cover, not collecting as puddles on the workshop floor, reducing workshop hazards and the need for mopping up after parts cleaning.

With a powerful pump and a 3.7kw motor delivering 40-100Bar cleaning jets the HPCS-16 Makes short work of any parts cleaning job. Simple valve operation makes it easy to switch between the lower pressure detergent hose and the high pressure detergent gun. Two Separate high pressure air jets come from the air gun and upper mounted air hose. The air hose offers hands free operation with the ability to adjust the position and direction of the air jet so both hands can be used to manipulate the part during cleaning. This also doubles as an air wiper for the screen on the protection cover to maintain clear visibility of the cleaning area during operation. Foot switch operation allows simple start/stop activation of the detergent flow with the lamp, heater and sir being switch operated from the side of the unit keeping all the controls easily accessible for the  operator.

Main Work Area Features

features-1024x579
How It Works
You can operate the HPCS-16 machine through the control panel and a simple foot-switch. This machine has a big reservoir that allows parts to be soaked as required. The water and detergent mixture in this reservoir is heated to set temperatures between 40-60degrees and deployed through the powerful gun or the low-pressure fixed nozzle. The mixture is double filtered and recycled to clean all manner of parts in-house, keeping running costs for the operator as low as possible. After the process, no pollution, no harmful additives gases or chemical to harm you, and your car or the environment. The whole process is also very economical, potentially saving motorist much money.
Benefits
  • Remove carbon deposits
  • Lower emissions.
  • Restore engine horsepower
  • Optimize combustion efficiency
  • Increase engine life
  • Improved Compression
  • A Longer Life Expectancy for Your Engine
  • Increased Engine Performance
  • Lowers Oil Consumption
Technical Parameters
The High-Pressure Cleaning System allows the operator to remove excess carbon build-up from all manner of car components like the inlet manifold or exhaust system. This stainless-steel body machine houses a 70-liter detergent reservoir with a powerful 3.7kw motor that delivers 40-100bar cleaning jet. It also features CE certified operator gloves, which are 80cm in length and constructed from hard wearing chemical-resistant Neoprene.
Features

The Washing table houses the 70L detergent reservoir just below it with easy access from above. This allows use of the reservoir to soak parts as and when required. The water and detergent mixture can be heated to set temperatures of 40-60 C and deployed through either the low pressure fixed nozzle or the high pressure gun. The mixture is double filtered and recycled through the system keeping running costs as low as possible. When the mixture comes to the end of its useful life it is easily drained thought the waste value in the base of the cabinet.  With the whole cleaning area being self contained any spray is kept within the protection of the cover, not collecting as puddles on the workshop floor, reducing workshop hazards and the need for mopping up after parts cleaning.

With a powerful pump and a 3.7kw motor delivering 40-100Bar cleaning jets the HPCS-16 Makes short work of any parts cleaning job. Simple valve operation makes it easy to switch between the lower pressure detergent hose and the high pressure detergent gun. Two Separate high pressure air jets come from the air gun and upper mounted air hose. The air hose offers hands free operation with the ability to adjust the position and direction of the air jet so both hands can be used to manipulate the part during cleaning. This also doubles as an air wiper for the screen on the protection cover to maintain clear visibility of the cleaning area during operation. Foot switch operation allows simple start/stop activation of the detergent flow with the lamp, heater and sir being switch operated from the side of the unit keeping all the controls easily accessible for the  operator.

Main Work Area Features

features-1024x579
Join the Revolution!

Carbon Clean machines are exclusive and are original concepts and designs. If you see them available elsewhere they are rip-offs please contact us.